Combing NoilA comber is a machine that is used to combing fibers of cotton, wool, and other materials. The two most important components are a mechanism for feeding a fringe of fibers forward at regular intervals and an arrangement of combs or pins that, when the timing is perfect, pass through a fringe of fibers. Cotton when worn, it is exceedingly soft and comforting to the touch. Furthermore, Comber Noil Exporter team of professionals is capable of customizing the items in accordance with the specific specifications specified by the customers. It is with great pleasure that the introduce you to the world of cotton textiles.

Tricking out the short strands and arranging the fiber in a flat bundle with all the fibers pointing in the same direction is what combing is all about! This preparation is often used in the production of worsted yarn. Woolen yarns cannot be spun from fiber that has been prepared with combs; rather, the fiber must be carded before spinning..

Natural Cotton Bale is one of the products that Comber Noil Exporter provide to several industries and customers. Farmers harvest the natural cotton bales and distribute them to local marketplaces where they may be sold to the general public. They get the highest quality cotton from village markets it in the ginning equipment in order to separate the cotton that is free of contamination. This contamination-free cotton is squeezed in press machines to make bales, which are then transported. The combing procedure eliminates a preset amount of short cotton fibers from a bunch of cotton fibers by combing them together. A well-known fact about cotton fibers is that they come in a wide range of lengths ranging from very long to extremely short fibers.

The following is the operational sequence of the Combing Noil Comber Machine:

  1. feeding: Lap enters the machine via a gap between the feeding roller and the feeding platform (feed plate). The feed rollers are in motion, and the material is being moved forward.
  2. Nipping and combing by cylinder comb: The nippers travel forward, causing the fibers to be pinched between the two cylinders. The cylinder comb is now ready to be used for comb-outs.
  3. Piecing: Nippers are open once again and travel in the other direction. Backward rotation is provided by the detaching rollers. Whenever the nippers go forward, the projecting fibers are positioned on the return piecing.
  4. Delivery and combing by Comber Noil are achieved by rotating the detecting rollers, which begins the process of delivering the sliver. At this point, the top comb is active and is combing the sliver of hair.

Objects For Combining Noil

  1. The purpose of removing the fibre that is less than a certain length is to allow the spinner to generate a finer yarn.
  2. In order to produce cleaner yarn, it is necessary to eliminate any leftover contaminants in the pre-comber lap.
  3. In order to remove the neps from the carded sliver,
  4. To make the fiber more parallel and straight, resulting in a yarn that is more even and lustrous in appearance.
  5. Finally, make a uniform sliver with the desired weight per unit length and collect it in a container in a coil-like configuration.

The Combing Process has a number of shortcomings:

  1. Generally speaking, the combing section is an insertion of three machines into the typical spinning process that occurs between the card and the draw frame. This demands the use of additional space and a conditioned environment, both of which are getting more costly.
  2. If the carded yarn does not achieve the required texture, it may be used as an extra mechanism to increase the Combing Noil yarn quality. Undoubtedly, the addition of three extra machines to the process raises the cost of the yarn, since it requires more energy and labor to operate these additional units.
  3. The design of the comber itself is not particularly satisfying since it operates on an intermittent processing basis, which raises the cost even more than it already does.
  4. Approximately 7.5 times per second, the full mass of the nipper assembly must be accelerated to its highest speed and calmed down to its maximum speed again. Despite the fact that it is a difficult work, the sporadic processing that results in a decrease in productivity.


Please enter your comment!
Please enter your name here