Complete guide about the AMD fx8350 overclocking

AMD’s FX-8350 may reach incredibly high clock speeds with innovative cooling, but it cannot compete with contemporary Ryzen CPUs. The AMD fx8350 overclocking is an outdated yet fast CPU with 8 cores/threads and an out-of-the-box base clock speed of 4GHz. According to AMD, the FX 8350 CPU can be overclocked to 4.2 GHz utilising an air cooler. This is a completely new feature, and AMD’s confidence in the overclocking potential of their CPUs has encouraged the company to roll out this launch. The overclocking on the FX 8350 is achieved by increasing the multiplier to 80.

As a result, the base clock speed can be raised to 512 MHz beyond stock 4GHz. The FX 8350 is equipped with a new 8 core / 16 thread design along with an 8MB L3 cache. The FX series has been around for several years now and was one of AMD’s first chips to feature HyperTransport 3.0 technology which allows higher speeds than its predecessors. In order to maximise potential you should have as little as possible in your computer (as these are crazy numbers!). This means that if you have a decent case make sure it has good airflow, front panel fans, power supply unit etc.

AMD FX-8350 Overclocking Guide

The following guide shows you how to overclock your FX-8350 using the multi-core AMD Vishera chip. The guide also covers things like cooling and voltage adjustments. The clock speed increases are super easy to achieve and do not require much effort on your part if you’re willing to learn how to tune your CPU (and let it run cooler). This guide is applicable to Windows users only.

Components Required for the fx8350 overclocking:

A CPU cooler, preferably a liquid cooler. Water cooling is strongly recommends because the air handles cannot handle the heat the Vishera CPUs produce very well. However, you can use any other type of CPU cooler, but keep in mind that your processor will run hotter if you do so. Here’s a separate AMD fx8350 overclocking cooling guide for you to check out. A motherboard with an AM3+ socket (Bulldozer based CPUs require an AM3+ socket).

You’ll need to check your motherboard model number to make sure it uses AM3+. A power supply with a minimum of 12 amps. You can use an 850 W power supply if you have one. It’s best if you have a PSU with a large number of connectors, as these come in handy when you’re fx8350 overclocking your CPU. A case that allows for easy installation and enables good airflow inside the case. The FX-8350 requires more heat than most processors as its 8 cores each produce 200W of heat.

How to Overclock AMD FX 8350 Safely?

Important Software Installation: 

You will need to install the following software before you begin overclocking your AMD FX 8350. CPU-Z & GPU-Z Application to check CPU and GPU details respectively. A CPU temperature monitoring program like Real Temp to monitor your CPU temperatures. You can also use HWMonitor, but this one is not as accurate. A stress testing program like Prime95 26.6 for loading your CPU and running it at 100% for extended periods of time in order to check for errors in the system. A motherboard monitoring program like CoreTemp or MSI Afterburner that allows you to monitor various temperatures. It includes the core temperature of the processor as it is running at full load.

Getting into the BIOS: 

A lot of processors have overclocking features that are not easily accessible by the end user, but the AMD FX-8350 has them. You can access these by going into your BIOS (usually a hidden menu) and enabling overclocking , The first thing you need to do is increase your core voltage. This improves the stability of your overclocked CPU so that it does not crash or become unstable. You can learn how to fix an unresponsive CPU at 100% load here on this guide. It’s important that you increase the voltage slowly and test things one step at a time, so that you understand what you’re doing..

Setting Overclocked CPU Speed: 

The default speed for AMD fx8350 overclocking is 4GHz and the maximum allowed for all CPUs is 5,000 MHz, so don’t expect much from this one. So from here to the end you will be looking at your overclock as a percentage. This means that if you start off with 200% then you will reach 4,200MHz after about 15 minutes of running at 200% heat or so.

Overclocking the CPU Core Voltage:

The first thing you need to do is increase your core voltage. This improves the stability of your overclocked CPU so that it does not crash or become unstable. You can learn how to fix an unresponsive CPU at 100% load here on this guide. It’s important that you increase the voltage slowly and test things one step at a time, so that you understand what you’re doing.

Adjusting Processor Clock Speed:

In most cases, you will not have any instability issues if your clock speed has gone up by 10%. However, if you’re running at 85% and you start to get errors then you will have to back down a bit on the clock speed.

Adjusting Memory Frequency:

The memory frequency can also adjust independently of the CPU core speed. In order for this option to work properly, you must make sure that your RAM is rates for DDR4. You should also adjust the RAM timing as well, unless you’re going to buy new RAM modules and rest them directly on the motherboard. If this is right, then your new RAM modules will have better timings than stock RAM which is a good thing because they’ll run cooler as well.

Adjusting CPU Multiplier for the Vishera CPUs:

This is the final step in overclocking your AMD fx8350 overclocking and FX-8320 processor. Make sure that your CPU multiplier is set to 40 and then set all of your cores to an overclock speed of 200%, which in this case is 4200MHz. If you get errors during stress testing, then lower the multiplier by one step. Keep adjusting it until there are no more errors or crashes during Prime95 26.6. Once you’re done, reboot your system and make sure that everything is still running smoothly.

Final Tweaks:

Now that you’ve overclocked, it’s time to make some last minute adjustments. If you get errors or crashes often then try increasing the CPU Overdrive voltage. This further improves system stability and improves performance at the same time. You can learn how to increase the, CPU core voltage CPU Overdrive voltage on this guide here. If you’re using a soft-cooling CPU cooler, try installing a thermal pad between your processor and your processor’s heat sink and try again. This will reduce heat even further.

Final Words: 

It recommends that you start off with an fx8350 overclocking and let it run for at least 5 minutes before you turn it back down to +10%. This is especially important for people using powerful water cooling systems because their temperatures are very high. It’s also advisable to set your CPU core voltage as high as possible which can reach 1.26V. Although one thing to note is that the maximum CPU core voltage cap is 1.40 volts. In recent BIOS updates these settings will not work for most people anymore.

LEAVE A REPLY

Please enter your comment!
Please enter your name here