Carpet cleaning eglinton

There are many natural routes that people follow when they walk, and these can leave a trail of dirt on carpets. There are many ways to clean high-traffic areas on carpet. Each has its advantages and disadvantages. Follow the steps below to clean your carpet.

Dry Cleaning

This method is quick and easy. There is no need to use water. However, some powder may remain in the carpet after attempting to remove it. It is important to carefully read the label on the product you choose to make sure it is safe for pets and children.

How to clean the carpet:

  1. Start by vacuuming your carpet.
  2. Choose a dry carpet cleaner such as the Capture and Host brands. To apply the cleaner, follow the directions on the bottle. Start by cleaning the edges first, then work your way inward.
  3. Apply the dry cleaning solution to your carpet following the directions on the label.
  4. To remove dry cleaning solution, vacuum the area.
  5. To restore the pile, use the nozzle attachment for the vacuum

Foam Method

It is fast and easy. You can use it with or without water depending on the cleaner you choose. If any foam residue remains, it can attract dirt to the area in the future.

professional carpet cleaners

How to clean the carpet:

  1. Start by vacuuming your carpet.
  2. Choose a carpet cleaner designed for high-traffic areas like Zep or Resolve. Choose the safest cleaner for your pets and children if you have children.
  3. Follow the instructions on your cleaner’s label. Start by cleaning the edges first, then work your way inward.
  4. After shampooing the area that is most used, you can clean the whole carpet with an extraction machine (also known as a steamer). For more information about extraction cleaners, see the Additional Tips section.
  5. You don’t need an extraction cleaner. Instead, soak a towel in plain water and wring it out until it is damp. Rub the foam with the damp towel to get rid of as much as possible.
  6. To remove as much moisture from the carpet as possible, dry the area with a towel. Let the carpet dry completely before you start to walk on it.
  7. To restore the pile, use the vacuum nozzle

Method for Hand Shampoo

All these methods require that you rub the cleaner into the carpet. Hand shampooing is much easier than this. Although this method requires some water, it is important to not overwet your carpet. However, you will get less residue from this method than with dry or foam cleaning, which will help keep your carpet cleaner for longer.

How to clean the carpet:

  1. Start by vacuuming your carpet.
  2. Choose a detergent that is safe for the carpet material, such as Woolite for wool carpets. An enzyme detergent such as Seventh Generation would work best if your carpet is made of nylon or polyester. Bright dyes should be avoided.
  3. Fill a spray bottle with a small amount of detergent and then fill it up with water. To ensure that the detergent is well mixed, shake the bottle.
  4. Lightly mist the area, but not so much as to soak the carpet.
  5. To scrub the area, use a nail brush. You should not scrub the area too hard as this could cause damage to carpet fibers. Start at the edges and then work your way inward.
  6. Use a towel or paper towel to dry the area.
  7. To remove any detergent residue, soak a towel in plain water. Then, wring the towel out to dry it well.
  8. To remove as much moisture from the carpet as possible, dry the area with a towel. Let the carpet dry completely before you start to walk on it.
  9. To restore the pile, use the vacuum nozzle

Additional Tips and Advice

  • There are many types of carpet available, including nylon, wool and olefin. You can check the label to make sure your product is safe for your particular material.
  • Carpets should be cleaned twice a year in high-traffic areas, and once a year for the rest.
  • High traffic areas can be avoided by vacuuming your carpet frequently.
  • Rotating the direction you vacuum the carpet in will keep it upright and prevent matting.
  • A throw rug can be used to cover high-traffic areas. This will eliminate the need to clean underneath. To prevent the pile from matting, vacuum the area underneath the rug every so often.
  • High traffic areas will not be cleaned by the carpet cleaners you can rent or purchase. Their solution will not be able to clean the entire carpet fiber. It is best to first use The Foam Method if you are looking to use an extractor.
  • Renting an extraction machine can often leave more water on your carpet than a professional carpet cleaning machine. This can cause damage to your carpet.

A professional carpet cleaner can be a cost-effective and safe choice, considering the high price of many products as well as the rental fees. You should let them know that there is a high-traffic area that requires cleaning. They can then bring a pretreatment product.

LEAVE A REPLY

Please enter your comment!
Please enter your name here