Reparacion Tejados Vitoria

Covering your home isn’t exactly the most exciting home project you can undertake, and very few people can argue with it.

However, when your home shows signs of leaking or the roof starts looking like it needs maintenance, you have no choice but to start considering a much-needed replacement.

A new roof can improve the look of your home and increase its value. So, if you are planning to sell your home, this is an improvement worth doing.

At the same time, replacing the roof will restore the sense of security you should feel at home.

When it comes to installing a new roof, there are many types of materials to choose from, each with its own advantages, disadvantages, and installation methods. Do your due diligence and research thoroughly before choosing a roofing material, as a large project like this is quite expensive. The last thing you want to do is a new replacement right after.

To help you, we will discuss various roof installation methods based on the type of material used. Keep in mind that the materials we’re going to talk about aren’t the only options available, but rather the most popular. So, don’t limit your search to just these.

Construccion de Tejados Vitoria

Roof Installation Guide:

Asphalt shingles

This is perhaps the most traditional roofing material in North America. It is durable, fairly inexpensive, and available in a variety of colors.

A great advantage of asphalt shingles is that if you want to make a change at a later time, you can cover the layer of shingles with new ones without having to replace them.

Haga clic aquí para obtener los servicios de Construccion de Tejados Vitoria en España

To fix the asphalt shingles, you need to use roofing nails drive them through the tabs immediately below the sealant line, and space them according to the manufacturer’s instructions.

When shingling a roof, start at the edge with what is called a starter strip, which can be created by cutting the tabs (about 6 inches) on the first shingle. Then, continue to apply full-length shingles along the gutter.

Once the starter strip is complete, move on to the second course and climb onto the roof, nailing each tile in place. Make sure you nail the first tile of each course about 6 inches narrower than the tile below.

Metal roofing:

The reason metal roofing is so popular with homeowners is that it can last a lifetime if installed correctly. There are many options for metal roofing, including shingles, shingles, vertical seam panels, and smoothies, all available in a wide variety of colors to suit any home. And because it’s lightweight, it can be installed on an existing roof, significantly reducing installation time.

Haga clic aquí para obtener los servicios de Reparacion Tejados Vitoria servicios en españa

While some types of roofing can be do-it-yourself, it is best to leave metal roofing to the professionals as they need many tools, special accessories, and special techniques to ensure proper installation of the new roof.

Generally, there are two ways to install metal roofing; using a through fastening system or a clip fastening system.

The first option involves a system in which the nail or screw that secures the roof to the deck penetrates the panel itself. In the second option, the panels or tiles are fixed with special clips, then the fasteners are guided through the clips instead of the actual metal cover.

Cedar shingles

Cedar shingles give a classic look to any home and the material makes the roof strong and durable with a high insulation value. Plus, it’s made from renewable material, which means you give something back to the environment as well.

Cedar shingles are installed one at a time, usually in single straight courses.

Two nails are typically used to secure the shingles, each spaced approximately one inch from the edges. To ensure maximum protection and insulation, the shingles should be doubled or tripled in all eaves, with the first-course shingles protruding 1-1 / 2 inches beyond the fascia.

The distance between the joints must be at least ¼ inch and the joints in any path must be separated by at least ½ inch from the joints in adjacent paths.

For more information, be sure to consult the manufacturer’s guidelines before installation and check the specific instructions.


Slate roofs usually cost more upfront than traditional asphalt shingles, but they are an investment that will pay for itself over time because synthetic slates are much stronger and look much better.

The process of installing a slate roof is much slower and you need to be more careful when handling the material. This is why it is recommended to contact a professional company for a new roof installation.

To ensure correct installation, the aluminum flashing W is installed on each side of the dormer window. The aluminum is then V-folded and the shingle caps are nailed all over.

Some slate roofs also require snow guards, to ensure snow doesn’t slip off the roof and cause accidents. The reason this is necessary is that unlike other materials such as asphalt, slate shingles are non-porous and snow will not be held onto the roof.

Clay and concrete

Clay roof tiles are highly regarded for their Mediterranean look which can give any home uniqueness. They are also very strong despite being lightweight, making them suitable for homes that do not support a heavy roof.

Before installation, you need to make sure that the surface is level to ensure an even roof. A subfloor, usually made of asphalt-saturated materials, is placed under the tiles to ensure that the tiles are installed correctly. After the substrate, a metal flashing is installed around the chimneys; vents are everywhere the roof meets a vertical wall.

The tiles are installed using a 10d nail placed at the base of the clay tile and in the batten. Add the grout under the first tile to ensure stability.

Install another tile at the other end of the row and then work your way to the center on each side.


Please enter your comment!
Please enter your name here