shower handle replacement

Shower handle replacement can be a pain if you don’t know how. That’s why we’ve put together this DIY guide on how to shower handle replacement without having to go to a professional. Read on to learn everything you need to know!

What is a shower handle?

Shower handles come in all different shapes and sizes, and they can be a real pain to replace if they break or become loose. Here’s how to do it yourself:

1. Measure the distance from the shower head to the wall behind it. This will give you the length of your screws.
2. Remove the old handle by unscrewing the three screws that hold it in place.
3. Install the new handle by screwing it into the wall behind the shower head using the screws you measured in step one. Be sure to tighten those screws!)

How does a shower handle work?

A shower handle is a simple porcelain or plastic piece that attaches to the side of the tub or shower and controls the water flow. Over time, they can become loose, rusted, and need replacement. This DIY guide will show you how to replace your shower handle yourself.

Required Tools:

Tape measure
Permanent marker
Jigsaw
Circular saw with blade at least 12″ long
Socket set
1/2″ drive socket wrench
or jigsaw blade with a very thin layer of metal on it (for cutting small plastic pieces)
Hammer
Nail gun or drill bit large enough for screws (@ 1/4″)
1. Prep the Area Around The Shower Head by Putting Down Plastic Sheeting And Leveling Out The Surface. This Will Help Make Removing The Shower Handle Easier Later On.
2. Mark The Location Of The Shower Handle On The Wall With A Permanent Marker. Use a Long Tape Measure To Measure And Mark Out, The Hole For The Shower Handle On Your Wall, Using A Centimeter Scale If Needed. Save Your Old Shower Handle For Replacement Later On.

3a Take Off hinges and cabinet knob if present on existing handles: If your handle doesn’t have hinges or a cabinet knob, you’ll need to take them off before starting the project. To do this,

Replacement of a shower handle

If you’re like most homeowners, your shower handles are either quickly corroding and flaking off, or they don’t work anymore. shower handle replacement is a do-it-yourself project that can be done in just a few minutes with a few basic supplies.

First, identify the handle your shower has. Most have a lever on one side and a piece that rotates to control the water flow on the other side. If you have an old-style handle, take note of the type of screw it uses. Most handles use screws that are Phillips head or Slotted Head screws. If your handle doesn’t come with instructions, diagrams are usually available online or in the owner’s manual for your particular shower fixture.

Next, gather your necessary supplies:

Tape Measure
Plywood
Drill
1/4″ Hex Wrench
1/4″ Allen Wrench
Hammer
Nails
Optional) Jigsaw or Rotary Hammer -“Lever Spring” (if applicable)

1.) Place the plywood under the bathroom fixture where the new handle will be installed so that you have something to hold onto while drilling. This also ensures accuracy when flipping over the old handle. Make sure to position the plywood so

Cost of shower handle replacement

Replacing a shower handle can be a relatively easy DIY project if you have the necessary tools and know-how. The replacement cost depends on the handle type and the manufacturer, but it can generally be around $10 to $15. Here are some tips to help you replace your shower handle:

1. Check the Handle Type

Before beginning any repairs, it is important to first determine which type of handle your shower has. There are four main types of handles: turquoise lever, teardrop lever, ball-type lever and butterfly lever. Each type has its specific replacement procedure.

2. Remove the Shower Housing

If your shower housing is plastic or ceramic, remove it by unscrewing the bottom or top screws, depending on the model. If your housing is metal, twist off the drain valve cover to give yourself more space to work and then remove the screws that hold it in place.

3. Remove The Handle Base

If your handle base is attached with screws, remove them before proceeding. On most models, the base contains two buttons – one for hot water and one for cold water – so be sure to save these! If your base is not attached to the wall, you must detach it before moving on. To do this, locate and loosen the screw that attaches it to the wall (usually near where taps come out), then pry it away from the bracket.

4. Remove the Old Handle

On most models, the old handle is held in place with two screws. Once they are free, gently pull the handle off of the stem. Be sure to dispose of it safely and responsibly, as shower handles contain harmful chemicals.

 

 

LEAVE A REPLY

Please enter your comment!
Please enter your name here