When you get into a road incident- let’s say, you hit another car- you might notice a few things. One is that the insurance company will take care of most (if not, all) of the damages. But there’s another thing you might notice: a dent or two on your car. Dents are inevitable, and whether the other driver had insurance or not, you’re stuck with the problem.
Most people would immediately start looking for a nearby auto shop that can help fix their dents. However, that’s not always necessary. You see, depending on the size and depth of the dent, you might be able to fix it yourself. Here are some steps on how the services of car dent repair Sydney fix car dents:
1. Identify the Type of Dent
There are different ways to determine what kind of dent you have. The most common are hail dents, door dings, and creases.
Hail dents are often small and evenly distributed across the surface of the car. They can be challenging to fix because you have to work on each dent individually.
Door dings are usually caused by another car’s door hitting yours. They’re usually bigger than hail dents but not as big as creases. Door dings are also easier to fix because you can work on them all at once.
Creases are the deepest and most severe type of dent. They occur when your car is hit with a lot of force, causing the metal to crumble. Creases are notoriously difficult to fix and often require professional help.
2. Assess the Damage
Once you’ve identified the type of dent, it’s time to assess the damage. This will help you determine what tools and materials you’ll need to fix the problem.
If the dent is small, you might be able to fix it with a plunger. Simply place the plunger over the dent and push and pull until the dent pops out.
For bigger dents, you’ll need something more substantial like a plunger or a vacuum cleaner. Place either one over the dent and wait for the suction to pull the dent out. You may need to repeat this process several times before the dent is completely gone.
3. Use Boiling Water
If you’re having trouble getting the dent out with a plunger or a vacuum cleaner, you can try using boiling water.
Boil a pot of water and pour it over the dented area. Reach behind and pop the dent out. The heat from the water will cause the metal to expand, making it easier to remove the dent.
4. Use a Vacuum Cleaner
Another way to remove a dent is with a vacuum cleaner. This method works best on smaller dents.
Place the vacuum cleaner over the dent and turn it on. The suction will pull the dent out. You may need to do this several times before the dent is completely gone.
5. Use a Hairdryer
This method is similar to the vacuum cleaner method, but instead of using a vacuum cleaner, you’ll use a hairdryer.
Place the hairdryer over the dent and turn it on. The heat from the hairdryer will cause the metal to expand, making it easier to remove the dent.
6. Use a Plunger
If all else fails, you can try using a plunger. This method works best on smaller dents.Place the plunger over the dent and push and pull until the dent pops out. You may need to do this several times before the dent is completely gone.
Conclusion
These are just some of the ways professionals fix car dents. Although you may do these steps yourself, calling a cheap car dent repair automotive workshop in Sydney is still the best thing to do.
